WIDE TREAD SPACER

  • Upgraded to a wide tread by bolt-on mounting on genuine and commercially available aluminum wheels.
  • High-quality products manufactured under precise design and strict quality control (MADE IN JAPAN).
  • Hub bolts are made of chrome molybdenum steel, and hardened high-strength and high-durability bolts are used.
  • Becomes a body and a tsuraichi, contributing to the cool appearance. With the wider tread, the turning performance has improved.
  • A special nut (for 11 to 15 mm) prevents the spacer from loosening. High reliability that can withstand hard sports driving.

Wide Tread Spacer M12

Thickness Thickness
11mm
15mm
20mm
25mm
30mm
  • Number of holes HOLE: 5H ・ 4H
  • PCD: 100 ・ 114.3
  • Thickness Thickness: 11/15/20/25 / 30mm
  • Outer diameter outer dia.: 145mm
  • SIZE: M12 × P1.5 / M12 × P1.25
  • Material Material: Aluminum / Bolt (SCM435 chromoly steel)
  • 2 pieces 1 set (2pcs SET)
  • Accessories / Dedicated nut / Dedicated adapter

* Dedicated hub ring is sold separately.

 

Thread size HOLE PCD Thickness mm Product No. JAN code
M12 x P1.5 Five 114.3 11 5111W1 4965581 806389
15 5115W1 4965581 803104
20 5120W1 4965581 800806
25 5125W1 4965581 800608
30 5130W1 4965581 804200
100 11 5011W1 4965581 806372
15 5015W1 4965581 803005
20 5020W1 4965581 800707
25 5025W1 4965581 800509
30 5030W1 4965581 804002
Four 114.3 11 4111W1 4965581 806365
15 4115W1 4965581 802909
20 4120W1 4965581 800400
25 4125W1 4965581 801803
30 4130W1 4965581 803807
100 11 4011W1 4965581 806358
15 4015W1 4965581 802800
20 4020W1 4965581 801902
25 4025W1 4965581 801704
30 4030W1 4965581 803609

 

Thread size HOLE PCD Thickness mm Product No. JAN code
M12 x P1.25 Five 114.3 11 5111W3 4965581 806426
15 5115W3 4965581 803500
20 5120W3 4965581 801605
25 5125W3 4965581 801407
30 5130W3 4965581 804309
100 11 5011W3 4965581 806419
15 5015W3 4965581 803401
20 5020W3 4965581 801506
25 5025W3 4965581 801308
30 5030W3 4965581 804101
Four 114.3 11 4111W3 4965581 806433
15 4115W3 4965581 803302
20 4120W3 4965581 801209
25 4125W3 4965581 801001
30 4130W3 4965581 803906
100 11 4011W3 4965581 806396
15 4015W3 4965581 803203
20 4020W3 4965581 801100
25 4025W3 4965581 800905
30 4030W3 4965581 803708

 

Wide Tread Spacer PCD Change M12

Thread size HOLE PCD PCD Change
(Vehicle side → Wheel side)
Thickness mm Product No. JAN code
M12 x P1.5 Five 114.3 114.3 → 100 15 5215W1 4965581 804606
100 100 → 114.3 15 5415W1 4965581 805009
Four 114.3 114.3 → 100 15 4215W1 4965581 804408
100 100 → 114.3 15 4415W1 4965581 804804

 

Thread size HOLE PCD PCD Change
(Vehicle side → Wheel side)
Thickness mm Product No. JAN code
M12 x P1.25 Five 114.3 114.3 → 100 15 5215W3 4965581 804705
100 100 → 114.3 15 5415W3 4965581 805108
Four 114.3 114.3 → 100 15 4215W3 4965581 804507
100 100 → 114.3 15 4415W3 4965581 804903

 

■ Dedicated nut / dedicated adapter [for 11 to 15 mm]
Uses a 12-point dedicated nut.
The 12-point handle is a high-strength and durable nut that does not easily deform because it distributes torque efficiently.
* Design registration No. 1467026

 

Replenishment parts (1) PARTS (1pc)

■ 11mm nut
Product No. Size JAN code
Z10150 M12 x P1.5 4965581 113913
Z10125 M12 x P1.25 4965581 113937

 

■ Nut for 15mm
Product No. Size JAN code
Z15150 M12 x P1.5 4965581 113920
Z15125 M12 x P1.25 4965581 113944

 

■ Nuts for 20 to 30 mm
Product No. Size JAN code
F1.5 M12 x P1.5 4965581 113609
F1.25 M12 x P1.25 4965581 113906

11-15mm Adapter

21HEX
Product No .: A-86
JAN code: 4965581 511733

20-30mm Adapter

(Nut side) 17HEX / (Wrench side) 21HEX
Nut side 17HEX / Wrench side 21HEX
Product No .: A10 L60
JAN code: 4965581 511702

 

Warning, vehicle models that cannot be installed
● Vehicles with numbers 1, 4, and 8
● Drum brake vehicles with uneven mounting surfaces
● For special vehicles other than the above, please contact us.

 

Precautions when installing the wide tread spacer
* Please do not install other than domestic cars.
● If the tires and wheels are subjected to a strong impact, excessive force will be applied to the wide tread spacer, and if it is used as it is, it may be damaged and may lead to an accident. Therefore, never use the product. ..
● Depending on the thickness of the spacer and the offset of the wheel, it may not be possible to install it on the vehicle (protruding from the fender or contacting the tire house)
. When purchasing, please check the condition of the current car before purchasing.
● Do not mount steel wheels as the mounting surface is not flat.
● Before mounting, be sure to remove rust, dirt, etc. from the mounting surface on the back side of the wheel and the hub side of the vehicle body with a wire brush, etc. before mounting.
● Do not apply oil or grease to the hub bolts of the car body, hub bolts of spacers, and mounting nuts. The
bolts may be damaged if tightened more than necessary .
● If there are foreign objects or protrusions on the hub side of the car body or the back side of the wheel, do not install it.
● When the wide tread spacer is attached to the vehicle body hub bolt, if the bolt protrudes from the spacer,
do not attach the wide tread spacer .
● If there is an “escape” on the back side of the mounting wheel, it is possible to mount a wide tread spacer. However, if the “escape” depth
is not enough to allow the genuine stud bolt to escape, do not install the wide tread spacer.
● Drum brakes whose mounting surface is not flat Cannot be mounted on vehicles or if there are protrusions. Also,
never install it on a vehicle with steel wheels .
● Some vehicles have a large hub diameter, and wide tread spacers may not be installed.
When purchasing, please check the diameter of the vehicle hub and the inner diameter of the wide tread spacer before purchasing.
● After installing the wide tread spacer, it is recommended to adjust the alignment to prevent uneven wear of the tire.
● When installing on a vehicle with a sliding door, be careful not to let the tires stick out. The sliding door may
interfere with the tires and prevent it from opening.

Please note that the 10mm hub-centric ring may not be installed on vehicles with a vehicle hub height of 12mm or more, depending on the shape of the wheel mounting surface .
● We do not guarantee any failure or damage due to incorrect installation or handling.