57XTREME STD Spec
Realizing a wide variety of faces Extreme model
In order to enjoy the sport of every car, literally this 57Xtreme model takes it to the limit. Each size and offset has different design patterns: totally more than 30 patterns. Side machining was introduced as a SP spec while low offset, wide width sizes offers a rigidity ring feature.
- Method：Cast 1pc. Wheel
- RAYS original test：JWL+R Spec 1
- Color：Matte Graphite (MF)
- Included：Inside Air Valve (Aluminum) BK
- Optional：57Transcend Center Cap、57Xtreme Center Cap
Variations
Matte Graphite (MF)
Size Chart
| INCH | SIZE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
|---|---|---|---|---|---|---|---|---|
| 17 | 7J | FACE-1 | 43(28) | 5 | 114.3 | φ29-φ15 | φ73.1 | ― |
| 50(29) | ― |
Caution
-
- ・INSET ( )：hub clearance/mm
- ・Hub clearance is the measurement to the center cap attachment. Measurements will differ depending on the center cap used. Please refer to the option parts tab for more information on center cap clearance.
| INCH | SIZE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
|---|---|---|---|---|---|---|---|---|
| 18 | 7 1/2J | FACE-1 | 40(28) | 5 | 114.3 | φ29-φ15 | φ73.1 |
▽Θη■⊿
|
| 50(24) | ― | |||||||
| 8 1/2J | FACE-2 | 42(22) | 5 | 100 | φ29-φ15 | φ56.1 | ― | |
| FACE-2 | 42(22) | 5 | 114.3 | φ29-φ15 | φ73.1 |
⊿
|
Caution
-
-
- ・INSET ( )：hub clearance/mm
- ・Hub clearance is the measurement to the center cap attachment. Measurements will differ depending on the center cap used. Please refer to the option parts tab for more information on center cap clearance.
- [ MARKS of BIG CALIPER CLEARANCE ]
- ※Big caliper clearance marks are not suggestions for fitment.
- ・▽： IMPREZA (GDB & GRB 4POT)
- ・Θ： WRX STI
- ・η： WRX STI (6POT)
- ・■： IS, GS, RC, CROWN (210), MARK-X (3.5L)
- ・⊿： IS-F
-
| INCH | SIZE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
|---|---|---|---|---|---|---|---|---|
| 19 | 8 1/2J | FACE-2 | 44(24) | 5 | 100 | φ29-φ15 | φ65 | ― |
Caution
-
-
-
- ・INSET ( )：hub clearance/mm
- ・Hub clearance is the measurement to the center cap attachment. Measurements will differ depending on the center cap used. Please refer to the option parts tab for more information on center cap clearance.
- ※19inch scheduled to be discontinued once inventory clears.
-
-