57FXM
Hot on the heels of the 57FXZ comes the second model of the next-generation
Following the 57FXZ’s release comes the new 57FXM—the latest model in the 2×7 mesh series. The design—sharp spokes and holes where the spokes intersect—follows that of the 57FXZ, plus some accents to the flange and spoke crotch sections that give the spokes a long and three-dimensional look. The 57FXM’s matte graphite color emphasizes the edges, further enhancing the wheel’s beauty.
- Method:Cast 1pc. Wheel
- RAYS original test:JWL+R Spec 1
- Color:Matte Graphite(MF)
- Included:Center Cap, Air Valve
- Optional:EU parts set
Size Chart
INCH | SIZE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
---|---|---|---|---|---|---|---|---|
18 | 8 J | FACE-1 | 45(47) | 5 | 100 | φ29-φ15 | φ65 | – |
45(47) | 5 | 114.3 | φ29-φ15 | φ73.1 | – | |||
35(57) | – | |||||||
19 | 7 1/2J | FACE-1 | 50(38) | 5 | 100 | φ29-φ15 | φ65 | – |
55(33) | 5 | 114.3 | φ29-φ15 | φ73.1 | – | |||
45(43) | – | |||||||
8 1/2J | FACE-1 | 45(56) | 5 | 100 | φ29-φ15 | φ65 |
▼
|
|
45(56) | 5 | 114.3 | φ29-φ15 | φ73.1 |
▽Θη■⊿#△○★
|
|||
38(63) |
▽Θη■⊿◎#△○☆◇
|
|||||||
FACE-2 | 36(36) | 5 | 114.3 | φ29-φ15 | φ73.1 |
⊿
|
||
9 1/2J | FACE-2 | 42(43) | 5 | 114.3 | φ29-φ15 | φ73.1 |
η⊿
|
|
32(53) |
▽Θη■⊿◎#△○★◇
|
Caution
-
- ・INSET( ): Hub clearance/mm
- ・Hub clearance listed is with the standard type center cap installed.
- [ MARKS of BIG CALIPER CLEARANCE ]
- ※Big caliper clearance marks are not suggestions for fitment.
- ・▽: IMPREZA (GDB & GRB 4POT)
- ・▼: IMPREZA (GDB 4POT), 86/BRZ Brembo
- ・θ: WRX STI
- ・η: WRX STI (6POT)
- ・■: IS, GS, RC, CROWN (210), MARK-X (3.5L)
- ・⊿: IS-F
- ・◎: RC-F
- ・#: SILVIA
- ・△: SKYLINE (R34GT-R, CPV35, CKV36, HV37)
- ・○: FAIRLADY Z (Z33, Z34)
- ・☆: LANCER EVO.(VII~IX, X)
- ・★: LANCER EVO.X
- ・◇: GT-R (R35/φ380, φ390 rotor)
INCH | SIZE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | SAMPLE FITMENT |
---|---|---|---|---|---|---|---|---|
18 | 8J | FACE-1 | 45 | 5 | 112 | φ29-φ15 | φ66.6 | in development |
35 | ||||||||
45 | 5 | 120 | φ29-φ15 | φ72.6 | ||||
19 | 8 1/2J | FACE-1 | 45 | 5 | 112 | φ29-φ15 | φ66.6 | BENZ A-CLASS(W176)*,C-CLASS(W204)Fr* BMW X1(F48) |
38 | AUDI A4(8K),TT(8J),Q5(8R) BENZ E-CLASS(W213)Fr*,GLC(X253) BMW 5er.(G30)Rr |
|||||||
FACE-2 | 36 | AUDI A4(8K)Rr | ||||||
FACE-1 | 45 | 5 | 120 | φ29-φ15 | φ72.6 | BMW 3er.(F30) | ||
9 1/2J | FACE-2 | 42 | 5 | 112 | φ29-φ15 | φ66.6 | BENZ C-class(W204)Rr*, E-class(W213)Rr*, | |
30 | AUDI A5(8T) | |||||||
42 | 5 | 120 | φ29-φ15 | φ72.6 | BMW 3er(F30)Rr* |
Caution
-
-
- ・All 5H-P.C.D.112/120: Cannot fit Mercedes(GL Class, GLS Class, R550 4Matic, R350 4Matic 2012-, ML63 4Matic, S550 Plug in Hybrid, V class[W447], GLE63S 4Matic), Rolls-Royce, Bentley, Maybach(57,62), BMW X5 (7seater), BMW X5 (F15), BMW X6 (Active Hybrid), Land Rover.
- ※Fitments listed in this SAMPLE FITMENT are for reference only and do not guarantee inspection, clearance, and/or the size mandated by local authorities. Selecting sizes is by your own judgement and we recommend consulting fitments with a pro-fessional outlet.
- ※ * :Tuner size. (Tire and or wheel may interfere or protrude from the body/fender on normal based vehicles.
-
Features
FX Design
This design—combinations of Y-shaped spokes and holes between the spokes—is inherited from the 57FXZ. The carefully placed fine accents lend the wheel a three-dimensional and voluminous look and highlight the spokes’ sharp lines.
Rim Flange
The wheel is not a simple rim-over type. Instead, the design of the flange section gives the wheel a three-dimensional appearance, and the notches between the spokes make them seem longer.