21C
A New "C" for the 21st century that inherited its DNA from "Gr.C".
The VOLK RACING 21C adopts a dimple design that carries on the DNA of the original VOLK RACING Gr.C on its spokes in combination with a stepped rim. These forged one-piece wheel models with various step rim widths up to 12J, which can be applied to wide bodies, are supreme wheels that can only be realized by RAYS forging method. The VOLK RACING 21C, which was developed for the fantastic vehicles produced during and after the 80s using the latest design and analysis technologies debuts as a forged one-piece model that is both new and nostalgic at the same time.
- Method：Forged 1pc. wheel
- RAYS original test：JWL+R Spec 2
- Color：Bronze(Almite)(BR)
Dark Gunmetallic/Rim DC(VC) - Included：Air Valve
- Optional：Optional Center Cap, EU Parts Set
Variations
Bronze(Almite)(BR) LL Rim / FACE-3
Bronze(Almite)(BR) L Rim / FACE-3
Bronze(Almite)(BR) S Rim / FACE-1
Dark Gunmetallic/Rim DC(VC) LLL Rim / FACE-3
Dark Gunmetallic/Rim DC(VC) LL Rim / FACE-3
Dark Gunmetallic/Rim DC(VC) S Rim / FACE-1
Size Chart
| INCH | SIZE | RIM TYPE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
|---|---|---|---|---|---|---|---|---|---|
| 18 | 8 1/2J | S(39mm) | FACE-1 | 35 | 5 | 100 | φ29-φ15 | φ65 |
▼
|
| 35 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿◎♯△○☆
|
||||
| 9J | M(46mm) | FACE-1 | 30 | 5 | 100 | φ29-φ15 | φ65 |
▼
|
|
| FACE-2 | 20 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿♯△○☆
|
|||
| 9 1/2J | M(46mm) | FACE-1 | 30 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿♯△○☆
|
|
| FACE-2 | 20 |
▽Θη■⊿♯△○☆
|
|||||||
| L(70mm) | 0 |
▽Θη■⊿♯△○☆
|
|||||||
| 10J | L(70mm) | FACE-1 | 15 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿♯△○☆
|
|
| LL(95mm) | FACE-2 | -25 |
▽Θη■⊿♯△○☆
|
||||||
| 10 1/2J | L(70mm) | FACE-2 | 15 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿♯△○☆
|
|
| FACE-3 | 0 |
▽Θη■⊿◎♯△○☆◆
|
|||||||
| LL(95mm) | -25 |
▽Θη■⊿◎♯△○★◆
|
|||||||
| -40 |
▽Θη■⊿◎♯△○☆◆
|
||||||||
| 11J | LL(95mm) | FACE-2 | 0 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿♯△○★
|
|
| LLL(108mm) | FACE-3 | -30 |
▽Θη■⊿◎♯△○★◆
|
||||||
| 11 1/2J | LL(95mm) | FACE-3 | -20 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿◎♯△○☆◆
|
|
| LLL(108mm) | -40 |
▽Θη■⊿◎♯△○☆◆
|
|||||||
| 12J | LLL(108mm) | FACE-3 | -33 | 5 | 114.3 | φ29-φ13 | φ73.1 |
▽Θη■⊿◎♯△○☆◆
|
Caution
- [ MARKS of BIG CALIPER CLEARANCE ]
- ※Big caliper clearance marks are not suggestions for fitment.
- ・▼： IMPREZA (GDB & GRB 4POT), 86/BRZ Brembo
- ・▽： IMPREZA (GDB & GRB 4POT)
- ・Θ： WRX STI
- ・η： WRX STI (6POT)
- ・■： IS, GS, RC, CROWN (210), MARK-X (3.5L)
- ・⊿： IS-F
- ・◎： RC-F
- ・＃： SILVIA (S15)
- ・△： SKYLINE (R34 GT-R, CPV35, CKV36, HV37)
- ・○： FAIRLADY Z (Z33, Z34)
- ・☆： LANCER EVO.(VII～IX, X)
- ・★： LANCER EVO.X
- ・◆： GT-R (R35/φ380 rotor)
| INCH | SIZE | RIM TYPE | FACE | INSET | HOLE | P.C.D. | DRILL | BORE | BIG CALIPER CLEARANCE |
|---|---|---|---|---|---|---|---|---|---|
| 18 | 8 1/2J | S(39mm) | FACE-1 | 35 | 5 | 112 | φ29-φ15 | φ66.6 | AUDI RS3 |
| 35 | 5 | 120 | φ29-φ15 | φ72.6 | HONDA CIVIC TYPE R(FK8) | ||||
| 9J | M(46mm) | FACE-1 | 30 | 5 | 112 | φ29-φ15 | φ66.6 | AUDI RS3 | |
| 9 1/2J | M(46mm) | FACE-1 | 30 | 5 | 120 | φ29-φ15 | φ72.6 | HONDA CIVIC TYPE R(FK8) | |
| FACE-2 | 20 | HONDA CIVIC TYPE R(FK8) | |||||||
| 10 1/2J | L(70mm) | FACE-2 | 15 | 5 | 120 | φ29-φ15 | φ72.6 | HONDA CIVIC TYPE R(FK8) |
Caution
- ・All 5H-P.C.D.112/120: Cannot fit Mercedes(GL Class, GLS Class, R550 4Matic, R350 4Matic 2012-, ML63 4Matic, S550 Plug in Hybrid, V class[W447], GLE63S 4Matic), Rolls-Royce, Bentley, Maybach, BMW X5 (7seater), BMW X5 (F15), BMW X6 (Active Hybrid), Land Rover.
- ※Fitments listed in this BIG CALIPER CLEARANCE are for reference only and do not guarantee inspection, clearance, and/or the size mandated by local authorities. Selecting sizes is by your own judgement and we recommend consulting fitments with a pro-fessional outlet.
Features
Dimple Design
The design with dimples on the spokes is the RAYS traditional form inherited from the VOLK RACING Gr.C. In addition to the dimple form that is symbolic of the wheel, the latest design and analysis technologies were applied in earnest to advance the wheel to produce 21C as a new ‘C’ for the 21st century.
Bubble Back Processing (Back side of spokes)
We also worked hard on the design on the back side of the spokes. Needless to say, the cross section has a U shape. The opposite sides of the dimples were also raised to secure the cross-sectional thickness, which has realized optimal strength and rigidity.
Rim and Face
Five types of rims in various sizes from S (39 mm) to LLL (108 mm) and three types of face designs with different concaves are available. These forged one-piece wheel models with various step rim widths up to 12J are supreme wheels that can be realized only by RAYS forging method.
A.M.T.
Engraved ‘RAYS ENG./FORGED/MADE IN JAPAN’ letters by RAYS Patented Technology: A.M.T. (Advanced Machining Technology) on the center part emphasizes the finishing.
Face Design
VOLK RACING Center Cap
A Flat O Ring Type Center Cap
Hub clearance: 1mm